Get a free evaluation to see if you are in need of helical piers for remediation or new construction.
Get an engineer’s report or plans from a licensed, 3rd party engineer to see exactly what you need.
TRUSTED BY 2,500+ CUSTOMERS
We are trusted by 2,500+ customers all over North Texas for their foundation and soil needs.
Our foundation repair solutions come with a lifetime transferable warranty that stays with the house.
0% FINANCING FOR 18 MONTHS
We make it easy to get your foundation and/or soil fixed right the first time. Terms and conditions apply.
APD Repairs Sinking Concrete
Sinking Concrete? Don’t Replace! Repair!
How Does Poly Work?
Poly is a two-part hydrophobic chemical injected into the sub-soils through dime-sized holes. It then expands into foam, displacing water to fill voids under homes, and re-level pool decks, driveways and other concrete slabs. It hardens like concrete. Poly Foam compacts the loose soils to increase the load-bearing capacity of the area. It will seal or raise concrete and stabilize it. Ready to walk or drive on Immediately!
What do we mean by Hydro-Insensitive?
The foam APD uses is Hydro-insensitive because it forms high quality foam even in the presence of water.
This includes during the injection, reaction, and curing phases. Foam that fails during the injection phase will leave the surrounding water cloudy, signifying that the raw chemicals have dissolved into the water.
The Foam we use is made in the USA!
Our foams are environmentally friendly, consisting of 39-49% renewable and recycled materials. Designed specifically for different applications, APD only uses top-of-the-line material made 100% in the USA.
Three Step Poly Injection Process to Level Concrete
Our polyurethane foam method uses the concrete slab itself as a means of delivering poly foams that raise concrete, fill voids, and stabilize soils. A ⅝” hole is drilled through the slab into the subgrade. A tapered delivery port is installed into the ⅝” hole. The injection gun is connected to the port. The injection gun delivers the polyurethane material through the port and slab. Expansion of the material occurs within seconds, compressing loose soils and raising concrete.
First we drill a 5/8 inch hole (dime size) in the concrete.
Second we pump the two part chemical to lift and stabilize the concrete.
Third step, we patch the hole.
Why Polyurethane concrete is important
Polyurethane concrete systems provide for a completely seamless system that is resistant to attack from lactic acid, oleic acid and bacteria. It is also resistant to other caustic chemical chemicals common to food & beverage settings.
Cost-effective compared to concrete replacement, this high density polyurethane foam has quick cure time, is hydrophobic, moisture barrier, lightweight and provides 5/8” injection holes. With a material for any application, we are leading the concrete raising industry with this revolutionary new polyurethane application.
High Density Polyurethane concrete lifting and stabilization avoid costly tear out and replacement. This allows business to run smoothly around the Polyurethane project avoiding down time.
Quick Cure Time
5/8" Injection Holes
Polyurethane Foam Characteristics
High Density Polyurethane can spread into voids as small as 1/32”. RaiseRite Polyurethane foam will expand and flow into cracks and voids expanding far beyond the initial injection hole.
Uneven pool deck? Reduce trip hazards. APD Advanced Stabilization specializes in poly deep foam injections. We stabilize and raise the concrete around your pool, making your pool area safe and attractive again.
A concrete slab is a common structural element of modern buildings, consisting of a flat, horizontal surface made of cast concrete. Steel-reinforced slabs, typically between 100 and 500 mm thick, are most often used to construct floors and ceilings, while thinner mud slabs may be used for exterior paving
Concrete driveways requires virtually low to no maintenance, which saves both time and money in the long run. It can last over 20 years and weeds will not grow on the paved area. Considered one of the strongest material for landscaping, it can withstand more wear and tear then other choices.
A concrete walkway can be any type of path made of concrete. Concrete paths can be created by using poured concrete, concrete paving stones, or concrete blocks. Concrete is a popular choice for creating pathways because it is usually simple and inexpensive to install.
This innovative method of foundation void filling uses polyurethane foam to achieve slab stability. This high-density foam is injected into small holes drilled into your concrete slab. Upon injection, the polyurethane foam chemical reacts causing an expansion to fill and seal void defects.
Repair your sidewalks with poly foam injections
Trip hazards are a safety problem whether at home in the neighborhood, or in a commercial setting.
Uneven concrete isn’t just a small pain. It can actually cost you your homeowners insurance. Any lift over 1/4″ is considered a trip hazard. If someone trips over a trip hazard on your property you could be liable!
Poly foam injections will raise and level your current walkway back to even.
CUSTOMERS WE SERVE
GENERAL CONTRACTORS / DEVELOPERS
WHAT OUR HAPPY CUSTOMERS HAVE TO SAY
Fully satisfied with our quality of service and professional workmanship.
WhatsApp : +1(608)6186312
Contact her via her …
We offer foundation repair solutions (also known as home leveling) for both residential and commercial environments.
We offer soil stabilization injection solutions for residential, commercial, and roadway environments.